"A fantastic, triple layered, water resistant all year round glove"
Special Launch Price
3 Super Strong Materials combined in the right way to make one incredible glove.
For those that loved our previous Cruiser Glove, the Beast Glove is basically a new improved version.
We have upgraded the Cruiser Glove by changing the polyester/ nylon upper part to a much stronger Maximite® we have added another layer of leather to the bottom palm and also added a palm slider.
The comfortable design and full aramid lining stays the same with a new improved waterproof lining.
This product has a waterproof lining. This is to back up the recommended spraying of Fabsil on the outside of the garment and seams. The waterproof lining is of course sewn through to produce the garment so the seams need to be treated after a wash or heavy rain with Fabsil spray or equivalent.
The Beast glove is currently being tested to CE EN13594:2018. Passing this test will mean this product can be sold as motorcycle protective wear, until such time due to enforced European law it has to be sold as motorcycle leisurewear.
The EN test costs a lot of money so when it has passed the cost will have to be put in the price, so, unfortunately, they will be more expensive when it passes.
Our gloves are sized below, the width is measured from your ‘thumb pit’ directly across and the length is from the tip of your middle finger to your wrist.
SML = 4 1/4″ w x 8 1/4″ l
MED = 4 1/2″ w x 8 1/2″ l
LGE = 4 3/4″ w x 8 3/4″ l
XL = 5″ w x 9″ l
XXL = 5 1/4″ w x 9 1/4″ l
What is Maximite®?
Maximite® is our newest “State of the Art” fabric. Following on from our previous “State of the art” fabric of 2015 called Titanite® that, when tested with denim for our Elite jeans, passed the race suit test standard.When thickened and used with denim for our Maximus Jeans passed a world record 15.05 seconds which is twice that of most of our competitors and 50% higher than the next best.
Titanite® when tested as a single skin passed a higher standard than denim and Kevlar® to give you some idea.
Under our own tests Maximite® is approximately the same strength and abrasion resistance whilst being smoother and less shiny in appearance. This enables us to use it on the outside rather than mostly as a liner.
This then enables us to use it as a single skin fabric for single skin products such as the new Easyrider Hoodie and Jacket for normal, casual riding.
It also enables us to use it for our new Beast Gloves.
Our aim with Maximite® is to produce lighter weight realistic products that are not necessarily record-breaking and therefore heavy, as we have in the past, but are comfortable, wearable and realistic to the needs of normal domestic motorcycle riding.
So the aim is to be strong enough but light enough still to be used comfortably on a daily basis all year round.
Maximite® is currently in the process of being independently tested for a CE standard of abrasion resistance.
We seem to be one of the only companies adhering to the new legislation. Until this product has achieved its CE it cannot be sold as a motorcycle protective wear and must be sold as leisure wear.
Hipora Waterproof lining
This product is 100% fully lined with military grade 340-350 gsm para-aramid.
Brand of para- aramid : DuPont™ KEVLAR®
“DuPont™ and Kevlar® are trademarks or registered Trade Marks of E.I.du Pont de Nemours and Company”.
Palm Material – Quality Leather
Armour – Knuckles and Palm Slider
Water Resistance and treatment.
This product has a waterproof membrane attached to the inside of the outer material. This is to back up the recommended spraying of Fabsil on the outside of the garment and seams. The waterproof membrane is of course sewn through when producing the garment so the seams need to be treated after a wash or heavy rain with Fabsil spray or equivalent. We recommend Fabsil, as in our own tests it works FAR better than any other product. As the water resistance of the product is subject to maintenance by the user these garments are sold as water resistant and not water proof. Saying that, these products are sold virtually everyday from recommendations of people happy with their ability in the rain, when maintained properly.
Important Information Regarding CE Testing.
If a product is stated clearly to have a FULL CE approval it is sold as Motorcycle Protective wear. If a product does NOT state a FULL CE approval and only material test passes then it is sold as Durable Leisurewear, NOT as Motorcycle protection wear.
Although Roadskin always self regulated, most companies making bike jeans did not ie selling part lined jeans to fast bike owners etc, so due to this, European legislation has been enforced ie: all motorcycle clothing is being changed from leisurewear to protective wear by way of a new CE test pren17092. We are busy putting our products through this CE process, but until each product is proclaimed by us as fully CE approved it will continue to be be sold as leisurewear with no protection claims. When each one passes they will then be sold as protection wear, albeit at a higher price to pay for the CE.
No product can honestly guarantee against injury, we should and would never guarantee against injury even with these great products that we believe wholeheartedly in, as it could give a false sense of security to the rider.
All we can do is make the best products we can.
If a customer is expecting a guarantee or assurance of no harm or injury to themselves or anyone they must simply not purchase our goods.
Saying that we are the only company we know of, that makes clear what each product is exactly designed for and the only company that has made the stance against financial gain to NOT sell PART LINED non fully reinforced products.
Which must show people that we are not a typical company that looks to profit first, we are a company that is genuine and cares about our fellow bikers.
S, M, L, XL, XXL